Technology

Solarian Vision: thermal and EL image analysis for solar panels.

Solarian Vision helps our engineers analyse thermal drone images from solar plants and electroluminescence (EL) images from factory module batches. Detection models flag potential defects, which are assessed against the relevant standard or the project's acceptance criteria. An engineer reviews and approves the results.

A drone flying over a solar array at sunset, its operator standing on the modules

Every solar panel examined, one by one.

A thermal survey or factory batch can contain thousands of images. Vision scans them for potential defects and links each finding to the module's location or serial number. Our engineers review the findings, with the images and assessment criteria available alongside them.

Thermographic inspection with thermal drone imaging

The images from a thermal imaging drone flight are assembled into one map of the plant. Detection models locate every solar panel and mark hot spots and bypass diode faults. Temperature differences are normalised to 1000 W/m² and classified by the severity classes of IEC TS 62446-3. Our engineer reviews the map, an approver locks the result, and the report lists every finding with its module, its temperatures and its class.

Standards applied

  • IEC TS 62446-3
  • ISO/IEC 17020

Thermographic inspection is within our ISO/IEC 17020 accreditation scope.

Thermal map of a solar plant in Solarian Vision with every module outlined and numbered, and one module's finding, temperature difference and source frames in a side panel

Review of EL testing images, batch by batch

Before a batch of modules leaves the factory, Vision reads the electroluminescence (EL) test image of every solar module in it. Models mark micro cracks, finger interruptions, inactive areas and soldering defects cell by cell, and each module is assessed against the acceptance criteria agreed for the project. The flash test reports and packing lists are checked against the same serial numbers. The factory responds to each rejected module through its own link, and our engineer completes the batch review.

Electroluminescence image of a module in Solarian Vision with detected marks boxed on the cells and listed by class, confidence and cell beside the engine's and Solarian's decision

How Vision works

  • Image intake

    Thermal flights and factory EL images are imported in batches, each image tied to its module's serial number or its position in the plant.

  • Defect detection

    Detection models scan every image and mark the candidate defects on each solar panel.

  • Assessment against criteria

    Findings are assessed against versioned criteria: the standard's severity classes for thermal, the project's acceptance criteria for EL.

  • Review and approval

    Our engineer reviews the results and corrects them where needed; approval locks the result and the report is issued.

Let's discuss your energy investment.

Tell us about your project and the technical support you need.

Get in touch